Live and standard tracking

Live sends your position as you move; Standard uploads in batches and saves power.

Choose your mode

Both modes record your route with the same accuracy. The difference is how quickly your position reaches the website.

Standard

The default. Your route is saved on the phone and sent a few times an hour to save battery, so the website map can be a little behind you.

Live

Your position is sent as you move, so followers can watch you on the map in real time and see a "LIVE" banner on your journey. Live uses more battery and uses mobile data even if you have chosen Wi-Fi-only uploads. Live tracking needs an Explorer membership.

Tracking privacy

Explorer members can turn on Tracking Privacy in the same panel. It hides the last few kilometres of your route on the website until you have moved on, or after 24 hours, so nobody can see exactly where you stopped for the night. It works with Standard tracking only.

Battery saver

Battery saver is in the same panel, under Standard. The first time you turn it on, your phone asks to let Pebbls use its motion sensor, which is how it knows you've stopped or set off again. It pauses tracking when you've stopped for 10 minutes and picks up again once you're moving, so the first 200 m or so after a stop may show as a straight line. While it's paused the map shows "Paused to save battery"; tap Resume as you set off and nothing is missed. It's off unless you turn it on, and it isn't used with Live. It never pauses on a train, bus, car, boat or plane.

Live and end masks

Live tracking is not available while the chapter has an end location mask, because the two would contradict each other. Remove the end mask under JOURNEY › Edit Chapter if you want to go live.

Mobile app